These iconic models from the 80s and 90s are known for their portability and high-quality sound.
Still, like any mechanical device, they can suffer from wear and tear and gash over time, and one of the most common problems is a broken drive belt. In this post, we’ll show you how to replace the belt in your Sony Walkman, step by step.
Before we get started, it’s important to note that there are different models of Sony Walkman, and the process for replacing the drive belt may vary slightly depending on the specific model you have.
Still, the introductory principles are the same, and this post should give you a good idea of what is involved.
Step 1. Gather the necessary tools and accouterments.
To replace the drive belt in your Sony Walkman, you will need many introductory tools and accouterments. Then what you will need to replace the drive belt?
- A small screwdriver (flat or phillips) depending on your Walkman’s screws
- Nose pliers
- Isopropyl alcohol
- A clean, dry cloth
- Tweezers or needle
Step 2. Open the Sony Walkman
The first step in replacing the drive belt is to open the Sony Walkman. Depending on the model, this may involve removing many screws. Relate to your Walkman’s service manuals for specific instructions on how to open the device.
Step 3. Detect the drive belt.
Once you have the Sony Walkman open, you should be suitable to detect the drive belt. This is a small rubber band that connects the motor to the spindle. You may need to use a flashlight or magnifying glass to get a good look at the belt.
Step 4. Remove the old drive belt.
Using your screwdriver and/ or tweezers, precisely remove the old drive belt from the Sony Walkman. Be gentle and take your time to avoid damaging any other details inside the device. However, you can use a small quantum of isopropyl alcohol to help loosen it up, if the old belt is wedged or hard to remove.
Step 5. Clean the Sony Walkman
Before installing the new drive belt, it’s a good idea to clean the inside of the Sony Walkman.
Use a clean, dry cloth to wipe down any visible dust or debris, and use a small quantum of isopropyl alcohol on a cloth to clean any hard-to-reach areas. This will help ensure that your Walkman runs easily and lasts longer.
Step 6. Install the new drive belt
Now it’s time to install the new drive belt. Precisely stretch the new belt over the motor and the spindle, being sure to align it duly so that it runs easily. Use your tweezers or needle-nose pliers to maneuver the belt into place, and be patient this can take some time to get right.
Step 7. Test the Sony Walkman
Once the new drive belt is in place, it’s time to test your Sony Walkman. Close the covering and power up the device and press play to see if the belt is running easily and the cassette player is playing correctly.
However, you are done! If not, you may need to go back and acclimate the belt or look for other issues that may be affecting the Walkman’s performance, If everything looks good.